Clutch Masters (High Rev) 725 Race Three Disc w/Steel FW - 4CYL

No reviews. Leave a review
$1,675.00 $1,507.50
You save $167.50
Current Stock:
STARTYEAR ENDYEAR MAKE MODEL SUBMODEL CYL LIT FUEL FUELDEL ASP ENGDESG NOTES
2002 2006 ACURA RSX BASE L4 2.0 ALL ALL ALL ALL 5Speed Trans
2002 2006 ACURA RSX TYPE-S L4 2.0 ALL ALL ALL ALL 6Speed Trans
2002 2010 HONDA CIVIC ALL L4 2.0 ALL ALL ALL ALL 5Speed Trans
2002 2011 HONDA CIVIC MUGEN SI;SI L4 2.0 ALL ALL ALL ALL 6Speed Trans
2003 2012 HONDA ACCORD ALL L4 2.4 ALL ALL ALL ALL 5Speed Trans
2004 2008 ACURA TSX ALL L4 2.4 ALL ALL ALL ALL  
2009 2013 ACURA TSX ALL L4 2.4 ALL ALL ALL ALL 6Speed Trans
2012 2013 HONDA CIVIC SI L4 2.4 ALL ALL ALL ALL 6Speed Trans
2013 2014 ACURA ILX ALL L4 2.4 ALL ALL ALL ALL 6Speed Trans
2013 2014 HONDA ACCORD ALL L4 2.4 ALL ALL ALL ALL 6Speed Trans

 

Clutch Masters Twin Disc Clutch Kit: Clutch Masters is proud to introduce the finest and most economical multi-plate clutch systems available for today’s high performance vehicles, the 725 and 850 Series. 

Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications. They are designed to hold tremendous horsepower and torque ratings, while retaining a very smooth operation. By slightly increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with only a 25-50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. 

The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications.


*725 SERIES* – (7.25” Twin Disc)
The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response. 

*850 SERIES* – (8.50” Twin Disc)
The 850 series is a larger diameter assembly, which is designed for high horsepower applications that require smooth engagement, quiet operation and high clamp load.


*All systems include:*
* Cover Assembly with attached Diaphragm
* Pressure Plate Ring
* Two Discs
* One Mid Plate
* Billet Aluminum Flywheel
* Release Bearing
* Pilot Bearing (when applicable)
* Pressure Plate Bolts

 

Notes: 725 Series Custom Triple Disc; 7.25in Disc (Race); Steel Flywheel Included
Manufacturer: Clutch Masters 
Product Category: Clutches

 

 

No one has reviewed this product! Write a Review

Related products

Customers also Viewed